PROFILINE ceramic coating CC EVO SONAX

 This is a professional, two-component protective coating with the latest technology and innovation. The set includes two coating products of the latest generation SONAX PROFILINE Ceramic Coating CC Evo BaseCoat and SONAX PROFILINE Ceramic Coating CC Evo GlossCoat, as well as four applicators. Thanks to the latest formula, durability has been further improved: protection for up to 5 years. CC EVO is the highest quality SONAX coating, characterized by the highest resistance and the exclusive appearance of the vehicle after coating.

Application:

Ensure good ventilation during work. It is recommended that the room temperature be at least +10°C. The optimal application temperature is 20–30°C.

It is extremely important that this coating does not contain harmful fluorine compounds, which are extremely harmful to human health and pollute the environment!

Thoroughly clean the surface to be coated and, if necessary, polish it beforehand. Immediately before applying the coating, the surfaces must be completely clean. To do this, use SONAX PROFILINE Prepare with a soft microfibre cloth and carefully wipe all surfaces. Then apply CC Evo in two stages. In the first stage, apply BaseCoat EVO thinly to the surface using the applicator. Wait until it starts to dry and wipe off the excess product with a soft microfibre cloth, then move on to the next part. 1 hour after application, take GlossCoat EVO with the applicator and spread the BaseCoat thinly over the coated surface. The drying time of GlossCoat should be between 3 and 5 minutes. Then remove the excess product with a new microfibre cloth for coatings.

If the coating starts to harden in the applicator during processing, take a new one. After complete application, leave the vehicle in a dry place for at least 4 hours. During this time, the coated vehicle must not be touched or get wet. Ideally, the vehicle should be left overnight. Do not use on hot surfaces. Do not let the product dry. Do not wash the vehicle for 1 week after coating. Important: do not use strongly alkaline and acidic cleaners or detergents, as they may damage the protective layer.

The pH range of washing chemicals that are friendly to the coating is from 2 to 10.

In order for the coating to last the declared period, regular maintenance and general care are necessary.