Flexible long-term protective coating for various films: colored, glossy, matte and PPF. Has water and dirt repellent properties. Enhances the color of both glossy and matte films without changing their structure. The surface becomes slippery and pleasant to the touch. Suitable for matte films! There are 4 application sponges in the box. The effect remains: up to 15 months or up to 25,000 km. Drop contact angle: 110° Applicators are included in the box

Usage:

1. Wash the film thoroughly. Surfaces must be completely clean
2. Degrease surfaces with SONAX PROFILINE Prepare product
3. Spread the PPF and vinyl coating on the light side of the applicator and apply enough liquid to the film in a criss-cross pattern.
4. The treated area should be about half a square meter (1/4 of the hood).
5. Care must be taken to ensure that the coating is evenly applied, as many films are highly absorbent and may form spots or clouds (high spots).
6. Wipe off excess product immediately without leaving streaks with SONAX microfibre cloths for coatings.
7. If the applicator starts to harden during use, use a new one.
8. After treating the entire vehicle in this way, the coating must cure for at least 6 hours.
9. The vehicle must be kept in a clean and dry environment at all times and the surfaces must no longer be touched.
10. For optimal product performance, we recommend allowing the coating to crystallize for 12 hours.
11. Use only high-quality neutral pH products and shampoos for washing